Westfield Megabusa Build Diary

20 Feb 2008
Cycle wing fitting part 2

We have already drilled the holes into the cycle wing brackets, so now all we need to do is position the arches into place, mark them, and then drill through, leaving a hole that we can bolt through.

We followed the manual's guidelines for positioning and then marked onto the arch from the underside using the holes we had drilled in the bracket as a template.

Now we just drilled through and then bolted the M5 screws down. The only problem is that we are out of foam tape which should be fitted between the bracket and the arch, so we fit them loosely until we can get some more.

Laurence

Front cycle wings fully fitted. The black looks great against the green. A closer view.

Warning: mysql_close(): 7 is not a valid MySQL-Link resource in /home/megabusa/public_html/includes/connect.php on line 77